Full-size sofas, small sofas, apartment couches and chairs are all RTA (Ready To Assemble) and easy to assemble when you order online from Simplicity Sofas.
No tools required. Assembles in 15 minutes* using our exclusive QAS (Quick Assembly System.) Made in the USA. Shipped direct to you from our High Point, NC factory.
* The world's record for fastest assembly of a full-size 180 lb. Simplicity Sofa is currently 3 minutes, 54 seconds, held by Skyler Miller, Age 8. Watch Skyler's video. http://www.youtube.com/watch?v=gwPONAW3llY
Traditionally, Ready-to-Assemble furniture takes a couple of hours to construct and requires the aid and patience of your friends and dozens of bolts, screws or other fasteners to hold the product together.
Simplicity Sofas is unique. The patented design requires only 4 hand-tightened bolts so that assembly can be accomplished in 15 minutes or less. Most customers are able to assemble our furniture without looking at the enclosed one page instruction sheet.
To put together our Ready-To-Assemble furniture, follow these easy steps:
1. Turn the sofa over on its back or front and attach the four legs.
2. Attach the arms by inserting the protruding bolts through the matching holes in the sofa base.
3. Turn the sofa upright and unfold the back.
4. Pull the back up and backward until the latches click into place.
5. Turn the sofa over and on the end of each protruding bolt place a washer and a 3 prong black plastic knob. Hand-tighten the knobs.
6. If you have purchased slipcovers, slide them into place now. Remember, the Velcro closure tab goes in the back.
7. Place your cushions on the sofa.
For disassembly, simply reverse the process. It should not take more than 5 minutes. Simplicity Sofas furniture can be assembled and disassembled hundreds of times without any loss of structural integrity.
Simplicity Sofas has furniture that is easy to move and set up. Just follow our tool-free assembly, and within a few short minutes, you'll be stretched out with your feet up. So go ahead, dream BIG!
|Tip seat frame and screw the four legs into pre-drilled holes||Insert arms into the holes on the sides of the seat frame and fasten underneath by hand||Pull up the attached back frame and snap into position then push down to lock it in place||Place the cushions and ENJOY!|